專心研究,精心制作,謀求高品質發展
Focus on researching,Elaborately making, seeking high quality development.
專心研究,精心制作
謀求高品質發展

印花設備專用油加熱器

  • 寶貝詳情
  • 印花設備專用油加熱器

     

    >>機型特點   Main feature
        ●   
    最高使用溫度300℃  Highest temperature reaching 300

           按鍵式操作面板,操作簡單 The panel control adopted micro, easy operation

           采用连轴式热媒油泵浦,泵浦流量大,使用寿命长 usehot oil pump of axis-connection type with big flow rate and long service life

                  可指定選用德國KSB、德國SPECK、德國ALLWEILER熱媒油泵浦    KSB, SPECK, ALLWEILER hot oil pump from Germen is available
        
       采用TAT法兰式球阀及法兰式过滤 器  TAT flanged ball valves and flange type filter

           “OMRON”、“SCHNEIDER”控制零件 Controlling parts of OMRON, FUJI brand

           自動排氣和帶手動模具回油功能 Full automatic exhaust function and manual mode die oil return function

           出油溫度顯示 temp. indication of oil output and return

           多段加熱控制,功率可自行調整 multi-zone heating control with power self-adjusting function

           電氣配電箱采用雙重隔離及散熱設計 Double-insulation/heating dissipation design for the electric distributioin cabinet
           减少废品率、减少加热時间、增加模具/模板寿命  Increase the service life of mold/ templet and reduce the waste rate and the heating time

           特殊管路系統設計,傳熱油不氧化,壽命長Special design for pipeline system in which the heat-transfer oil is not oxidized with a long lifecycle.  

           采用高溫保溫材料隔熱處理,節約能源及熱量損失小High-temperature insulation materials can be adopted on the heat insulation so as to save energy and reduce heat loss.

           故障指示,維修不用專業人員Fault indication function which allows maintenance without professional maintainers.


    >>安全保護系統 Safety system
      ●   
    總電源過電流無熔絲斷路器 Circuit breaker     ●   異常警告指示燈系統 Alarm system
        
       馬達反轉保護及指示燈 motor rollback protective lamp     ●   異常警告蜂鳴器 Alarm sounding
        
       缺油保护及指示灯Oil lack protective lamp                     ●   保溫隔熱處理 Insulation heating system
           過熱保護及指示燈 over-heat protective    ●   回油温度显示表Oil reture display
           循环泵浦过载保护及指示灯Circuiting pump overload protective lamp                            

       电源欠相保护 Power protection
           By-Pass油压回路 By-pass hydrauic circuit
    ;

    >>夫妻生活前戏看的影片參數Specification

    机 型Model

    單位Unit

    OTP-30-36

    OTP-40-36

    OTP-50-36

    溫控範圍

    Control range

    60-300℃



    溫控精度

    Control mode

    ±1



    電源power


    3φ 380V 50HZ 或其它(or other)



    传热媒体Heat transfer medium


    传热油heat tranfer oil



    冷却方式Cooling method


    间接冷却indirect cooling



    控制方式Control mode


    按键式操作面板 touching-tone   operation panel



    加热能量Heating capacity

    KW

    36

    36

    36

    泵浦功率pump rate

    KW

    1.5

    2.2

    3.75

    最大泵浦流量max. pump flow

    L/MIN

    130

    165

    208

    最大泵浦压力max. pump pressure

    KG/CM

    2.2

    2.5

    3.2

    最大电力消耗max.power consumption

    KW/H

    37.55

    38.2

    29.2

    冷卻水配管

    Cooling pipe

    INCH

    1/2

    1/2

    1/2

    循环油配管Circulation oil pipe

    INCH

    1

    1-1/4

    1-1/2


    印花設備專用油加熱器

     

    >>機型特點   Main feature
        ●   
    最高使用溫度300℃  Highest temperature reaching 300

           按鍵式操作面板,操作簡單 The panel control adopted micro, easy operation

           采用连轴式热媒油泵浦,泵浦流量大,使用寿命长 usehot oil pump of axis-connection type with big flow rate and long service life

                  可指定選用德國KSB、德國SPECK、德國ALLWEILER熱媒油泵浦    KSB, SPECK, ALLWEILER hot oil pump from Germen is available
        
       采用TAT法兰式球阀及法兰式过滤 器  TAT flanged ball valves and flange type filter

           “OMRON”、“SCHNEIDER”控制零件 Controlling parts of OMRON, FUJI brand

           自動排氣和帶手動模具回油功能 Full automatic exhaust function and manual mode die oil return function

           出油溫度顯示 temp. indication of oil output and return

           多段加熱控制,功率可自行調整 multi-zone heating control with power self-adjusting function

           電氣配電箱采用雙重隔離及散熱設計 Double-insulation/heating dissipation design for the electric distributioin cabinet
           减少废品率、减少加热時间、增加模具/模板寿命  Increase the service life of mold/ templet and reduce the waste rate and the heating time

           特殊管路系統設計,傳熱油不氧化,壽命長Special design for pipeline system in which the heat-transfer oil is not oxidized with a long lifecycle.  

           采用高溫保溫材料隔熱處理,節約能源及熱量損失小High-temperature insulation materials can be adopted on the heat insulation so as to save energy and reduce heat loss.

           故障指示,維修不用專業人員Fault indication function which allows maintenance without professional maintainers.


    >>安全保護系統 Safety system
      ●   
    總電源過電流無熔絲斷路器 Circuit breaker     ●   異常警告指示燈系統 Alarm system
        
       馬達反轉保護及指示燈 motor rollback protective lamp     ●   異常警告蜂鳴器 Alarm sounding
        
       缺油保护及指示灯Oil lack protective lamp                     ●   保溫隔熱處理 Insulation heating system
           過熱保護及指示燈 over-heat protective    ●   回油温度显示表Oil reture display
           循环泵浦过载保护及指示灯Circuiting pump overload protective lamp                            

       电源欠相保护 Power protection
           By-Pass油压回路 By-pass hydrauic circuit
    ;

    >>夫妻生活前戏看的影片參數Specification

    机 型Model

    單位Unit

    OTP-30-36

    OTP-40-36

    OTP-50-36

    溫控範圍

    Control range

    60-300℃



    溫控精度

    Control mode

    ±1



    電源power


    3φ 380V 50HZ 或其它(or other)



    传热媒体Heat transfer medium


    传热油heat tranfer oil



    冷却方式Cooling method


    间接冷却indirect cooling



    控制方式Control mode


    按键式操作面板 touching-tone   operation panel



    加热能量Heating capacity

    KW

    36

    36

    36

    泵浦功率pump rate

    KW

    1.5

    2.2

    3.75

    最大泵浦流量max. pump flow

    L/MIN

    130

    165

    208

    最大泵浦压力max. pump pressure

    KG/CM

    2.2

    2.5

    3.2

    最大电力消耗max.power consumption

    KW/H

    37.55

    38.2

    29.2

    冷卻水配管

    Cooling pipe

    INCH

    1/2

    1/2

    1/2

    循环油配管Circulation oil pipe

    INCH

    1

    1-1/4

    1-1/2